4th of July Centerpiece- Rustic Crate with Bottle Vases

Affiliate disclosure for 4th of July berry dessertThis rustic crate filled with flowers makes an easy and lovely 4th of July Centerpiece!
Rustic 4th of July Centerpiece
I love the 4th of July, and I’m participating in a super fun 4th of July round up today! Over 100 bloggers have created recipes, crafts, and home decor ideas that are Patriotic themed.  I’m sharing a 4th of July centerpiece, and you can check out all the others at the bottom of this post. Hooray for the Red, White, and Blue!
4th of July Round Up

I have been needing a 4th of July centerpiece for a couple of years, and I’ve had several ideas floating around in my head. I finally decided to just get ‘er done! This rustic crate was inspired by a similar centerpiece that the Shanty sisters from Shanty 2 Chic made for Christmas. I love them, and if you haven’t ever checked out their site, you are missing out!
4th of July Rustic Crate Centerpiece

Speaking of power tools, I am having a blast with mine! Now that summer is here, my husband is parking his car on the driveway so I can use my power tools in the garage. 🙂 Rachel’s room is coming along nicely, and I have several projects in the works that I can’t wait to show you! But for now, let’s talk about this 4th of July centerpiece. It was easier that I thought, and I am pretty thrilled with how it turned out. When Independence Day is over, I can swap out the flowers and ribbons for something else. I love interchangeable decorations!

4th of July Centerpiece- Rustic Crate with Bottle Vases

Supplies:
-A 1 x 4 x 6 pine board (The actual size of a 1×4 is 3/4″ x 3 1/2″. Go figure.
You will need the following lengths:
    Bottom piece: 2 3/4″ x 8″
    2 side pieces: 3 1/2″ x 8″
    2 end pieces 3 1/2″ x 4 1/4″
-Miter saw (or you can have them cut your wood to length at the hardware store)
Wood glue
-Nail gun (I use the Ryobi Cordless Brad Nailer and adore it)
-Wood filler (optional)
Palm sander
Tack cloth or soft cloth
Wood stain and rags to apply
-3 glass bottles (I used IBC root beer bottles)
-Ribbon and tulle in 1 yard lengths
-Flowers (fresh or fake)

Instructions: Cut all your wood pieces to the correct size, and sand off the jagged edges. The 3 1/2″ boards are just 1×4’s. Only the bottom piece has to be cut down lengthwise.) rustic-wood-crate-instructions Use wood glue and a nail gun to attach the two side pieces to the edges of the bottom piece. diy-rustic-wood-box Use wood glue and a nail gun to attach the two end pieces to form a box. diy-rustic-wood-crate If desired, fill the nail gun holes with wood filler. wood-filler Give the entire box a good sanding. I like to use a palm sander, it’s much quicker! Use a tack cloth to remove all the dust, then stain your box. I used the same stain I used for my oak railings, Java Gel Stain from General Finishes. I love the color! rustic-wood-crateYou can skip this step, but I like to distress my edges by sanding with my palm sander. 4th-of-july-centerpieceNow fill your soda bottles with flowers, and place them in the box. rustic-wood-box-tutorialTo finish things off, just wrap your crate with tulle and ribbons, and tie a knot in the front. Rustic 4th of July CenterpieceFlowers just make me happy, even if they are the fake variety. 🙂 Patriotic Flower Centerpiece I love how my centerpiece turned out and I hope you do too! And as always, I’d be thrilled if you PIN this project and share it with your friends. 🙂

These are the supplies that I used to make my wood crate: (affiliate links)

Don’t forget to check out all these other amazing Patriotic ideas!

Comments

  1. Of all the patriotic decorations, this one caught my eye. It is soo pretty. I made this ,only, I used a picnic basket and filled it with 12 small milk bottles. It served as a beautiful center piece for the ceremony, and then later i put a vase on each table for the meal.I bought red carnations and added one blue hydrangea and one white astilbe from my garden.

    • So glad you liked it! It sounds like your version turned out just perfect! I love that you doubled it up as a serving container! 🙂

  2. I absolutely LOVE this rustic crate! The bottles with the flowers look so pretty! Not to mention it could be updated with different ribbon and flowers to fit any season. I think I just HAVE to make me one of these! Thank you so much for the fabulous tutorial! You did a great job, we would love it if you linked up with our party this week! http://www.kraftingkreations.com/2014/06/awesome-things-tuesday.html

    • Thanks so much Amanda! I tried to link up, but it was already closed. I’ll have to try again next week. 🙂

Speak Your Mind

*

2K Shares
Pin2K
Share
+16
Yum
Tweet2